Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

328 Brocade Network Advisor SAN User Manual
53-1002696-01
Configuration repository management
12
Saving switch configurations on demand
NOTE
Save switch configuration is only supported on Fabric OS switches.
NOTE
This feature requires a Trial or Licensed version.
NOTE
To save switch configuration on more than one switch at a time, you must have the Enhanced Group
Management license.
NOTE
The Management application enables you to save the same switch configuration to the repository
using two methods: on demand (Configure > Configuration > Save) or by defining a schedule
(Configuration > Schedule Backup).
Configuration files are uploaded from the selected switches and stored in individual files. Files are
named with the convention cfg_fabricName_switchName_domainID.
Use this procedure to immediately save switch configurations to the repository. To create a
scheduled back up of switch configurations to the repository, refer to “Scheduling a switch
configuration back up” on page 330.
1. Select Configure > Configuration > Save.
The Save Switch Configurations dialog box displays.
FIGURE 121 Save switch configurations
2. Select the switches for which you want to save configuration files from the Available Switches
table.