Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

320 Brocade Network Advisor SAN User Manual

53-1002696-01

SMI Agent Configuration Tool

Configuring the SMI Agent port number

To configure the SMI Agent port number, complete the following steps.

1. Click the CIMOM tab.

FIGURE 118 CIMOM tab

2. Select or clear the Enable SSL check box, to enable or disable SSL for the SMI Agent.

NOTE

Disabling SSL will disable Indication and Client Mutual Authentication.

If the check box is checked (default), SSL is enabled. If the check box is clear, SSL is disabled.

3. Enter the SMI Agent port number in the SMI Agent Port # field.

This port number must be within the range of 1 through 65535. Defaults are 5989 with SSL

enabled and 5988 with SSL disabled.

4. Click Apply.

NOTE

Changes on this tab take effect after the next CIMOM server restart.

NOTE

You can only restart the server using the Server Management Console (Start > Programs >

Management_Application_Name 12.X.X > Server Management Console).

If you disabled SSL, a confirmation message displays. Click Yes to continue.

5. Click Close to close the SMIA Configuration Tool dialog box.