Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

Brocade Network Advisor SAN User Manual 319

53-1002696-01

SMI Agent Configuration Tool

1. Click the Authentication tab.

2. Choose from one of the following options:

• Select No Authentication to allow the CIM client to query the CIMOM server without

providing credentials; however, note that the CIMOM server requires the Management

application credentials to connect to the Management application server to retrieve the

required data. To provide Management application credentials, complete the following

steps.

a. Enter the Management application user name in the Username field.

b. Enter the Management application user password in the Password field.

• Select Management_Application Authentication to allow the CIM client to query the

CIMOM server and the Management application server using the credentials configured

on the Users tab.

3. Click Apply.

NOTE

Changes on this tab take effect after the next CIMOM server restart.

NOTE

You can only restart the server using the Server Management Console (Start > Programs >

Management_Application_Name 12.X.X > Server Management Console).

4. Click Close to close the SMIA Configuration Tool dialog box.

CIMOM tab

NOTE

You must have SAN - SMI Operation Read and Write privileges to view or make changes on the

CIMOM tab. For more information about privileges, refer to “User Privileges” on page 1097.

The CIMOM tab enables you to configure the CIMOM server port, the CIMOM Bind Network

Address, and the CIMOM log.