Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

Brocade Network Advisor SAN User Manual 209
53-1002696-01
Performance Dashboard monitors
8
• Double-click a row to navigate to the SAN Historical Graphs/Tables dialog box. For more
information, refer to “Performance Data” on page 895.
Top Port Encode Error Out monitor
The Top Port Encode Error Out monitor (Figure 69) displays the top ports with encoding errors
outside of frames in a table.
FIGURE 69 Top Port Encode Error Out monitor
The Top Port Encode Error Out monitor includes the following data:
• Severity icon/monitor title — The color of the worst severity of the data shown next to the
monitor title.
• Port — The port affected by this monitor.
• Encode Error Out/sec — The top ports with encoding errors outside of frames in seconds.
• Product — The product affected by this monitor.
• Type — The type of port (for example, U-Port).
• Identifier — The port identifier.
• Port Number— The port number.
• State — The port state (for example, Enabled).
• Status — The port status (for example, Up).
• Refreshed — The refresh time and selected time range for the monitor.
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to “Editing a preconfigured performance monitor” on page 220.
Accessing additional data from the Top Port Encode Out Errors monitor
• Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to “Application menus” on
page 1061.