Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

208 Brocade Network Advisor SAN User Manual
53-1002696-01
Performance Dashboard monitors
8
• Double-click a row to navigate to the SAN Historical Graphs/Tables dialog box. For more
information, refer to “Performance Data” on page 895.
Top Port CRC Errors monitor
The Top Port CRC Errors monitor (Figure 68) displays the top ports with frames that contain cyclic
redundancy check (CRC) errors in a table.
FIGURE 68 Top Port CRC Errors monitor
The Top Port CRC Errors monitor includes the following data:
• Severity icon/monitor title— The worst severity of the data shown next to the monitor title.
• Port — The port affected by this monitor.
• CRC Errors/sec — The top ports with frames that contain cyclic redundancy check (CRC) errors
in seconds.
• Product — The product affected by this monitor.
• Type — The type of port (for example, U-Port).
• Identifier — The port identifier.
• Port Number— The port number.
• State — The port state (for example, Enabled).
• Status — The port status (for example, Up).
• Refreshed — The refresh time and selected time range for the monitor.
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to “Editing a preconfigured performance monitor” on page 220.
Accessing additional data from the Top Port CRC Errors monitor
• Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to “SAN shortcut menus” on
page 1071.