Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)
202 Brocade Network Advisor SAN User Manual
53-1002696-01
Dashboard widgets
8
• Pie chart — The device status as a percentage of the total number of devices.
The pie chart displays the percentage in various colors on each slice. Tooltips showing the
number of devices in that state are shown when you pause on the slice. When there is one
status category with less than one percent of the total number of devices, the status widget
displays the number of devices in each category on each slice.
• Color legend — Displays the color legend below the pie chart using the color code in Table 26.
Accessing additional data from the SAN Status widget
Double-click a section in the SAN Status widget to navigate to the SAN Products - Status dialog box
(where Status is the section of the widget you selected). For more information, refer to “Viewing
additional SAN product data” on page 202.
Viewing additional SAN product data
1. Double-click a section in the SAN Status widget.
The SAN Products - Status dialog box (where Status is the section of the widget you selected)
displays with the following fields and components:
• Product — The product name.
• Fabric — The fabric associated with the product.
• Product Type — The type of product.
• State — The state for the product and the port.
• Status — The status for the product and the port.
• Tag — The tag number of the product.
• Serial # — The serial number of the product.
• Model — The model number of the product.
• Port Count — The number of ports on the product.
• Firmware — The firmware version of the product.
• Location — The physical location of the product. This field is editable at the fabric level.
• Contact — The name of the person or group you should contact about the product. This
field is editable at the fabric level.
2. Right-click any row in the table to access the corresponding shortcut menu for the device. For
more information about shortcut menus, refer to “SAN shortcut menus” on page 1071.
3. Click Close.
TABLE 26 SAN status color codes
Color Type
Green Healthy
Yellow Marginal
Red Down
Maroon Not Reachable
Gray Unknown