Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

Brocade Network Advisor SAN User Manual 171
53-1002696-01
Viewing Call Home configurations
7
• Call Home Centers list — The Call Home centers, products assigned to the Call Home
centers, and event filters assigned to the Call Home centers and products. This list
displays the following information:
 Centers — A tree with Call Home centers as the parent node, assigned products as
subnodes, and event filters as the child node to the assigned products.
 Enabled check box — Select the check box to enable the associated Call Home center
or clear the check mark to disable the Call Home center. By default, all check boxes
are selected during a fresh install.
 Support Save check box — Select the check box to enable supportSave, which collects
diagnostic information on Fabric OS switches.
 IP Address — The IP address of the product.
 Node WWN — The node WWN of the product.
 Fabric Name — The name of the fabric.
 Vendor — The vendor of the product.
 Call Home Status — One of the following Call Home statuses for the product:
- Enabled — The product is manageable and Call Home is enabled.
- Disabled — The product is manageable and Call Home is disabled.
- Not Manageable — The product is discovered but not manageable.
- Server Not Registered — The server is not registered to receive Call Home events
from the product.
NOTE
Call Home status only displays for Fabric OS products.
 DomainID —The domain ID of the product.
 Product Type—The type of product (switch, Layer 2 switch, router, or director).
• Edit Centers button — Click to open the Configure Call Home Center dialog box and modify
Call Home center information (refer to “Editing a Call Home center” on page 173).
• Show/Hide Centers button — Click to open the Centers dialog box and add or delete a Call
Home center (refer to “Showing a Call Home center” on page 172 or “Hiding a Call Home
center” on page 172).
2. Click OK to close the Call Home dialog box.