Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

Brocade Network Advisor SAN User Manual 153
53-1002696-01
Areas of responsibility
6
Deleting an AOR
NOTE
You cannot delete system AORs.
To delete an AOR, complete the following steps.
1. Select Server > Users.
The Users dialog box displays.
2. Select the AOR you want to delete in the AOR table and click Delete.
3. Click Yes on the confirmation message.
4. Click Close to close the Users dialog box.
Assigning products to an AOR
You can assign fabricsand hosts to an AOR from the Add, Edit, or Duplicate AOR dialog box.
To assign fabricsand hosts to an AOR, complete the following steps.
1. Select Server > Users.
The Users dialog box displays.
2. Click Add, Edit, or Duplicate under the AOR table.
The Add AOR, Edit AOR, or Duplicate AOR dialog box displays.
3. Click the Fabrics tab.
4. Select the fabrics you want to assign to the AOR in the Available Fabrics table and click the
right arrow button to move the products to the Selected Products table.
Select multiple fabrics by holding down the CTRL key and clicking more than one fabric.
5. Click the Hosts tab.
6. Select the hosts you want to assign to the AOR in the Available Hosts table and click the right
arrow button to move the products to the Selected Products table.
Select multiple hosts by holding down the CTRL key and clicking more than one host.
7. Cl ic k OK to save your work
8. Click Close to close the Users dialog box.
Removing products from an AOR
You can remove fabricsand hosts from and AOR from the Edit AOR or Duplicate AOR dialog box.
To remove fabricsand hosts from the AOR, complete the following steps.
1. Select Server > Users.
The Users dialog box displays.
2. Click Edit or Duplicate under the AOR table.
The Edit AOR or Duplicate AOR dialog box displays.