Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

Brocade Network Advisor SAN User Manual 135

53-1002696-01

Fabric tracking

Accepting changes for a switch, access gateway, or phantom domain

1. Accept the changes to a switch, access gateway, or phantom domain by choosing one of the

following options:

• Select the switch, access gateway, or phantom domain on the Product List or Connectivity

Map and select Monitor > Accept Changes.

• Right-click the switch, access gateway, or phantom domain on the Product List or

Connectivity Map and select Accept Change.

The Accept Changes Summary dialog box displays. This dialog box includes the following

information:

• Do not show me this again check box—Select if you do not want to see this dialog box

again when you enable or disable fabric tracking or accept changes for a switch or fabric.

• Fabric Name—Displays the name of the selected fabric.

• Switches—This table shows a brief summary of the switches including status (whether the

device port will be added ( ) or removed ( ) from the fabric), name, IP address, WWN,

and domain ID. This table includes unmonitored switches which becomes segmented from

the fabric.

• Device Ports—This table shows a brief summary of the device ports including status

(whether the device port will be added ( ) or removed ( ) from the fabric), device

type, port, port WWN, node WWN, and attached port number.

• Connections—This table shows a brief summary of the switch connections including the

status (whether the device port will be added ( ) or removed ( ) from the fabric) and

connection type as well as the WWN, domain ID, IP address, and port number of the

connected switches.

2. Click Yes to accept changes.