Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

Brocade Network Advisor SAN User Manual 121
53-1002696-01
Software Configuration
5
3. Enter how often you want to check for state changes in the Check for state change every field.
Valid values are from 1 through 600 seconds. You cannot enter a value lower than the default
minimum value.
Default minimum values are as follows:
• Small (Professional): 60 seconds
• Medium: 120 seconds
• Large: 180 seconds
4. Enter how often you want to check for state changes in the If no state change, Poll switch every
field.
Valid values are from 1 through 3,600 seconds. Default values are as follows:
• Small (Professional): 120 seconds
• Medium: 900 seconds
• Large: 1800 seconds
5. Click Apply or OK to save your work.
NOTE
Changes to this option take effect after an application restart.
NOTE
You can only restart the server using the Server Management Console (Start > Programs >
Management_Application_Name 12.X.X > Server Management Console).
6. Click OK on the “changes take effect after application restart” message.