Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

120 Brocade Network Advisor SAN User Manual

53-1002696-01

Software Configuration

• Enterprise Medium : 1500 MB

• Enterprise Large : 2048 MB

Default values for SAN only Server

Server Heap Size

For a 32-bit Windows or Linux Server

• Small : 768 MB

• Medium : 950 MB

• Large : 950 MB

For a 64-bit Windows or Linux Server

• Small : 1024 MB

• Medium : 1500 MB

• Large : 2048 MB

NOTE

There is no restriction on the maximum value for Server Heap Size in a 64-Bit Server. The

correct server heap size value must be given according to the RAM present in the server.

6. Click Apply or OK to save your work.

NOTE

Changes to this option take effect after an application restart.

NOTE

You can only restart the server using the Server Management Console (Start > Programs >

Management_Application_Name 12.X.X > Server Management Console).

7. Cl ic k OK on the “changes take effect after application restart” message.

Configuring asset polling

Asset polling allows you set the length of time between state change polling. To maximize the

efficiency of the polling feature (balance the amount of possible information with any possible

performance impact), base your settings on the size of the SAN.

To configure asset polling, complete the following steps.

1. Select Server > Options.

The Options dialog box displays.

2. Select Memory Allocation in the Category list to set the memory allocation for the server and

client.

The Memory Allocation pane displays.