Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

Brocade Network Advisor SAN User Manual 95
53-1002696-01
SAN name settings
5
 Operational Status — The operational status of the device. There are four possible
values:
- Up — Operation is normal.
- Down — The port is down or the route to the remote destination is disabled.
- Disabled — The connection has been manually disabled.
- Backup Active — The backup TCP port is active due to a failover.
 Port # — The port number.
 Type — The type of device.
3. Select one of the following options.
• If you select Append Incremental numbers for all repetitive names, the names are edited
automatically using incremental numbering.
• If you select I will fix them myself, edit the name in the Name field.
4. Click OK on the Duplicated Names dialog box.
5. Click OK to close the Configure Names dialog box.
6. Click OK on the confirmation message.
Viewing names
To view names associated with devices, complete the following steps.
1. Select Configure > Names.
The Configure Names dialog box displays (Figure 30).
FIGURE 30 Configure Names dialog box
2. Select All Names from the Display list.
Only devices with a name display. The table displays the following information.