Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

Brocade Network Advisor SAN User Manual 1267
53-1002696-01
Database tables and fields
H
LEVEL3_ENABLED Enable / disable the third threshold check. This value
is applicable only for Top N, Top Flow widgets. Default
is 0.
smallint
LEVEL3_VALUE Limit value for the third percentage band. Default is
0.
double
precision
LEVEL3_COLOR Limit value for the third percentage band. int
LEVEL4_ENABLED Enable / disable the fourth threshold check. This
value is applicable only for Top N, Top Flow widgets.
Default is 0.
smallint
LEVEL4_VALUE Limit value for the fourth percentage band. In case of
Top N, Top Flow widgets only three percentage bands
are available. This value is not applicable. Default is
0.
double
precision
LEVEL4_COLOR RGB color for the fourth percentage band.In case of
Top N, Top Flow widgets we will use this column to
store the color value for other percentage band.
int
LEVEL5_ENABLED Enable / disable the fifth threshold check. This value
is applicable only for Top N, Top Flow widgets. Default
is 0.
smallint
LEVEL5_VALUE Limit value for the fifth percentage band. In case of
Top N, Top Flow widgets only three percentage band s
are available. This value is not applicable. Default is
0.
double
precision
LEVEL5_COLOR RGB color for the fifth percentage band. In case of
Top N, Top Flow widgets only three percentage bands
are available. This value is not applicable.
int
CATEGORY Category of the dashboard monitor. 0 - System
defined, 1 - User defined, 2 - Promoted from
Historical Graph, 3 - Promoted from Real time Graph.
Default is 0..
smallint
GRAPH_ENABLED Enable or disable the time series graph for Top n or
Bottom n widgets. 0 = disabled, 1 = enabled.
smallint
FILTER_CRITERIA Stores the filter criteria to be applied on the selected
measure for products or ports.
varchar 256
FILTER_VALUE Stores the measure value to be used in the filter
criteria.
double
precision
TABLE 241 PM_DATA_COLLECTOR
Field Definition Format Size
ID Primary key column. int
NAME The name of the collector definition. varchar 128
STATUS Status of the collector. 0 - disabled and 1 - enabled.
Default - 0.
smallint
TYPE Target type of the snmp collector data. for device
level collector the target type is 0, for port level it is 1.
smallint
TABLE 240 PM_DASHBOARD_WIDGET (Continued)
Field Definition Format Size