Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

1236 Brocade Network Advisor SAN User Manual
53-1002696-01
Database tables and fields
H
MTU Maximum transmission unit in bytes of the FCoE port.
Default - 2112, 0 - auto
int
PATH_TOV The value between 0 and 60 that specifies the
time-out session.
NOTE: You can only enable or edit the path time out
when MPIO is disabled
int
SCSI_QUEUE_DEPTH The LUN queue depth feature determines how many
concurrent IOs the adapter will accept and process
per LUN (not at the adapter port level, as with the IO
throttle value). Not setting the queue depth to the
optimal level can result in poor performance, where
outstanding IO queuing can cause bottlenecks. For
optimum performance, consider both the
configuration settings of the HBA and the physical
limits on the storage array. If you set the queue depth
too low on the HBA it could lead to under-utilization of
storage resources.
NOTE: The Queue Depth feature is supported for all
adapter classes configured in FC or FCoE
mode (Windows operating systems only)'
int
STATE The state of the FCoE port (online or offline). varchar 64
SUPPORTED_CLASS The classes supported on the FCoE port.
For example, Class2 and Class3.
varchar 256
TRL_SPEED TRL (Target Rate limit) speed. This will be less than
max speed supported by this port.
int
TRL_STATE TRL (Target Rate limit) state of the port. Possible
values are 0 - disable , 1 - Enable
smallint
PG_ID The priority group ID. Possible values are 0-7
(user-definable) and 15.0-15.7 (strict priority).
varchar 32
PRIORITIES 'Lists the available priorities (High, Medium, Low). varchar 128
FCOE_MAC FCOE MAC address of the port. varchar 64
IOC_ID The IO controller Identifier. int
TABLE 158 HBA_REMOTE_PORT
Field Definition Format Size
ID Autogenerate primary column. int
SYMBOLIC_NAME The symbolic name associated with the remote port. varchar 256
PORT_WWN The world wide name of the remote device''s port. char 23
NODE_WWN The world wide name of the remote device char 23
NAME The name associated with the device varchar 256
FC_ADDRESS FC Address for the port in hex varchar 6
FRAME_DATA_SIZE The frame size, in bytes, of the device.
The default value is 512.
int
SPEED Operating speed of the remote port. int
TABLE 157 HBA_PORT_FCOE_DETAILS (Continued)
Field Definition Format Size