Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

Brocade Network Advisor SAN User Manual 1233
53-1002696-01
Database tables and fields
H
BOOT_TOPOLOGY Boot topology for the port. Possible values are 0 -
Point to Point , 1 - Loop. The default value is 1.
int
BOOTUP_DELAY On starting system how long system needs to wait for
user action. Configured value ranges 0,1,2,5 and 10
minutes. Default value is 0.
int
BB_CREDIT The maximum number of receive buffer.
The default value is 8.
int
FRAME_DATA_FIELD_SIZE The default value is 512. int
HARDWARE_PATH Indicates whether MPIO is enabled or disabled
V_PORT_COUNT Number of logical ports.
The default value is 0.
int
QUEUE_DEPTH The number of I/O operations that can be run in
parallel on a device.
The default value is 0.
int
INTERRUPT_CONTROL_COA
LESCE
Indicates whether interrupt control is on or off.
The default value is 0.
smallint
INTERRUPT_CONTROL_LAT
ENCY
Sets the interrupt control latency value..
The default value is 0.
int
INTERRUPT_CONTROL_DEL
AY
Sets the interrupt control delay value..
The default value is 0.
int
BEACON_STATE Indicates whether beaconing is on or off..
The default value is 0.
smallint
LINK_BEACON_STATE Indicates whether link beaconing is on or off..
The default value is 0.
smallint
MPIO_MODE_STATE Indicates whether multipathing mode is on or off..
The default value is 0.
smallint
PATH_TIME_OUT
The value between 0 to 60 that specifies the time out
session. Note you can only enable or edit the path
time out when MPIO is disabled.
The default value is 0.
int
LOGGING_LEVEL
The port logging level. Values include Log Critical, Log
Error, Log Warning, and Log Info. The default value is
0.
smallint
TARGET_RATE_LIMIT Target rate limit of the port. Possible values are 0
-disabled, 1 - enabled. The default value is 0.
smallint
DEFAULT_RATE_LIMIT Default target rate limit of the port speed (1 Gbps).
The default value is 0.
int
VF_MODE True if the port is in VF (Virtual Fabric) mode. smallint
RECIEVE_BUFFER_CREDIT Receiving buffer-to-buffer credits (BB_credits) for the
port.
varchar 64
TABLE 155 HBA_PORT_DETAIL (Continued)
Field Definition Format Size