Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)
Brocade Network Advisor SAN User Manual 1171
53-1002696-01
Database tables and fields
H
MODEL_NUMBER Model number is the same as the model number like
Brocade 8000, Brocade VDX 6710.
varchar 32
MANUFACTURER Manufacturer for the switch. varchar 32
PLANT_OF_MANUFACTURE
R
Plant of the manufacturer for the switch. varchar 32
SWITCH_SERIAL_NUMBER This is the factory serial number. varchar 32
ACT_CP_PRI_FW_VERSION Stores Active CP primary firmware version. varchar 128
ACT_CP_SEC_FW_VERSION Stores Active CP secondary firmware version. varchar 128
STBY_CP_PRI_FW_VERSIO
N
Standby CP primary firmware version. varchar 128
STBY_CP_SEC_FW_VERSIO
N
Standby CP secondary firmware version. varchar 128
TYPE Type of the switch, basically the sw bd type stored in
the core switch.
smallint
EGM_CAPABLE EGM license supported or not.
• 1 is supported
• 0 is not supported.
smallint
SUB_TYPE Sub Type of the switch. DCX+ and DCX-4S+ has
values as 1, otherwise 0.
varchar 32
PARTITION Partitions supported in the switch. smallint
MAX_NUM_OF_BLADES Required by SMIA to populate
Brocade_Chassis.MaxNumOfBlades property.
It indicates the max no of blades that can be present
in a chassis.
smallint
VENDOR_VERSION Required by integrated SMI agent to populate
Brocade_Product.Version property.
varchar 32
VENDOR_PART_NUMBER Required by integrated SMI agent to populate
Brocade_Product.SKUNumber property.
varchar 32
SNMP_INFORMS_ENABLED Flag to denote whether SNMP informs option in the
switch is enabled or disabled. Default value is 0.
smallint
RNID_SEQUENCE_NUMBER RNID sequence number for the switch. varchar 32
CONTACT Contact details of the switch. Syscontact from the
RFC 1213 Mib.
varchar 256
LOCATION Location details for the switch. Syslocation from RFC
1213.
varchar 256
DESCRIPTION Description about the switch. Sysdescr from RFC
1213
varchar 256
FIRMWARE_VERSION Firmware version of the switch. varchar 128
CHASSIS_PACKAGE_TYPE A value indicating the type of chassis. int
DOMAIN_NAME Denotes the domain name configured in switch. varchar 64
IP_ADDRESS_PREFIX Required to populate the prefix of IPv6 address.
Applicable only for IPv6 address.
TABLE 61 CORE_SWITCH_DETAILS (Continued)
Field Definition Format Size