Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

Brocade Network Advisor SAN User Manual 1129
53-1002696-01
SAN device properties
E
Protocol The network protocol, for example, Fibre Channel.
Reason The device status.
Remote Switch Name The remote switch name of the trunk.
Remote Switch IP The remote switch IP address of the trunk.
Remote Switch WWN The remote switch world wide name of the trunk.
Remote Slot # The remote slot number of the trunk.
Remote Master Port The remote master port of the trunk.
Remote Member Ports The remote member port of the trunk.
Sequence number The sequence number of the switch.
Serial # The hardware serial number.
Slot # The location (slot) of the port.
Source IP Address The IP address of the of the FCIP tunnel source device.
Speed (Gb/s) The port speed, in Gbits per second.
State The port state (online or offline).
Status The port’s operational status (online or offline).
Switch Name The switch name.
Switch IP The switch IP address.
Switch WWN The switch world wide name.
Symbolic Name The symbolic name of the port.
Tag The tag number of the port.
Tape Pipelining Whether tape pipelining is On or Off for the FCIP tunnel.
Troubleshooting list Select to launch the dialog box of one of the following troubleshooting
options:
• IP Ping
• IP Traceroute
• IP Performance
Tunnel Count The number of tunnels.
Tunnel ID The tunnel identifier.
Type The type of port, for example, U_port.
Unit Type The unit type of the node.
User Port # The number of the user port.
Vendor The product vendor.
# Virtual FCoE port count The number of virtual FCoE ports on the device. There is a one-to-one
mapping of TE ports to virtual FCoE ports. Therefore, the number of
virtual session ports is one for directly connected devices.
# Virtual Session Ports The number of virtual session ports associated with the GE port.
VLAN # The VLAN number of the FCIP tunnel.
TABLE 98 Port properties (Continued)
Field Description