Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)
Brocade Network Advisor SAN User Manual 1127
53-1002696-01
SAN device properties
E
Device Type Whether the device is an initiator or target.
Discovery Status The discovery status of the switch. Examples include ‘Discovered: Seed
Switch’ and ‘Discovered: Not Reachable’.
Distance Actual (km) The actual distance (in km) for -end port connectivity.
Distance Estimated (km) The estimated distance (in km) for -end port connectivity.
Domain ID The device’s domain ID, which is the top-level addressing hierarchy of the
domain.
Encryption Whether encryption is enabled or disabled.
Fabric The fabric’s IP address.
Fabric Name The name of the fabric.
Fabric Watch Whether Fabric Watch is up or down.
Fastwrite Whether fastwrite is On or Off for the FCIP tunnel.
FC Port The FC port of the FCIP tunnel.
FC Port Count The number of FC ports on the device.
FCIP Capable Whether the port is FCIP capable.
FCoE Capable Whether the device is Fibre Channel over Ethernet capable.
FCS Role Whether FCS is supported.
Flag (FICON related) Whether a flag is on or off.
Firmware The firmware version.
Forward Error Correction (FEC) Whether FEC is enabled or disabled.
GigE Port The GigE port of the FCIP tunnel.
GigE Port Count The number of GigE ports on the device.
Host Name The Host name.
IKE Policy # The IKE policy number. Also includes the following information:
• Authentication Algorithm
• Encryption Algorithm
• Diffie-Hellman
• SA Life
Inband Management Status The inband management status (online or offline).
Index The index of the Virtual FCoE Port.
Interface Count The interface count.
IP Address The device’s IP address.
IPSec Policy # The IPSec policy number. Also includes the following information:
• Authentication Algorithm
• Encryption Algorithm
• SA Life
iSCSI button Click to launch the Element Manager.
iSCSI Capable Whether the port is iSCSI capable or not.
L2 Capable Whether the device is Layer 2 capable.
TABLE 98 Port properties (Continued)
Field Description