Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

1126 Brocade Network Advisor SAN User Manual
53-1002696-01
SAN device properties
E
The following port types are available depending on the selected device:
• FC Ports
• GigE Ports
• IP Ports
• iSCSI Ports
NOTE
iSCSI ports that have an FC Address of all zeros are inactive. All others are active.
• Virtual Sessions Ports
• Virtual FCoE Ports
NOTE
Depending on the port type, some of the following properties may not be available for all products.
TABLE 98 Port properties
Field Description
Additional Port Info Additional error information relating to the selected port.
Address The address of the port.
Addressing Mode The addressing mode of the switch.
Active FC4 Types The active FC4 types.
Active Tunnels The number of active tunnels.
Area ID (hex)/Port Index (hex) The area identifier, in hexadecimal, of the switch-to-product connection.
Associated GE Port The port number of the associated GE port.
Attached Port # The port number of the attached product.
Back to Edge Routing Support Whether back to edge routing is supported.
Bandwidth The bandwidth of the FCIP tunnel.
Blocked The configuration of the switch (blocked or unblocked).
Bottleneck Status Whether the port is bottlenecked or not.
Buffers Desired The number of buffers desired but not allocated.
Buffers Allocated The number of buffers allocated.
Capability The node capability.
Class The class of the port.
Class of Service The class of service.
Compression Whether compression is enabled or disabled.
Connected Devices The number of connected devices. Click the icon in the right side of the
field to open the Virtual FCoE Port <Number> Connected Devices dialog
box.
Connected Switch The name of the connected switch.
Delete button Click to delete.
Description A description of the customer site.
Destination IP Address The IP address of the of the FCIP tunnel destination device.