Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

1058 Brocade Network Advisor SAN User Manual
53-1002696-01
Generating SAN performance reports
34
d. Select the granularity at which you want to gather performance data from the Granularity
list.
The granularity varies depending on the configuration on the Server Management
Console, Performance Data Aging tab.
Option 1—2 years data with the following samples
• 5 minutes granularity for last 1 day (288 samples)
• 30 minutes granularity for last 3 days (144 samples)
• 2 hour granularity for last 7 days (84 samples)
• 1 day granularity for last 2 years (730 samples)
Option 2—2 years data with the following samples
• 5 minutes granularity for last 8 days (2304 samples)
• 1 day granularity for last 2 years (730 samples)
For more information, refer to “Defining the performance data aging interval” on
page 309.
e. Select the measure by which you want to gather performance data from the Measures list.
To select more than one measure, click the Additional Measures expand arrows and select
the check box for each additional measure.
f. Save this configuration by selecting Save.
The Save Favorites dialog box displays. This enables you to save the selected configuration
so that you can use it to generate the same type of report at a later date.
1. Enter a name for the configuration in the Favorites Name field.
2. Click OK.
g. Click Apply.
The selected report automatically displays in the View Reports dialog box.
Hyperlinks in reports are active only as long as the source data is available.
To print the selected report, refer to “Printing SAN reports” on page 1056.
To export the selected report, refer to “Exporting SAN reports” on page 1055.
To delete the selected report, refer to “Deleting SAN reports” on page 1056.
4. Click the close button (X) to close the View Reports dialog box.
5. Click the close button (X) to close the HIstorical Performance Table dialog box.
For more information about performance, refer to “Performance Data” on page 895.