Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

Brocade Network Advisor SAN User Manual 977
53-1002696-01
Defining filters
32
Setting up advanced event filtering
To set up advanced event filtering on the selected events for a user, complete the following steps.
1. Select Server > Users.
The Users dialog box displays.
2. Select a user in the Users list and click Edit.
The Edit User dialog box displays.
3. Select the E-mail Notification Enable check box and click the Filter link.
The Define Filter dialog box displays.
4. Click Advanced.
The Advanced tab of the Define Filter dialog box, as shown in Figure 420, displays.
FIGURE 420 Define Filter dialog box - Advanced tab
5. Select the Start Date check box to display only the events that were logged after the specified
start date. The default start date and time is the current date and time.
6. To include events in the event filter, complete the following steps.
a. Select the event type you want to include from the Event Category list.
All event types are listed in alphabetical order.
b. Select the event column for the event from the Event Column list.
All event columns are listed in alphabetical order.
c. Enter all or part of the event type value in the Value Contains field.
d. Click the right arrow button to move the event type to the Additional Filters - Include these
Events list.