Brocade Network Advisor SAN User Manual v12.0.0 (53-1002696-01, April 2013)

970 Brocade Network Advisor SAN User Manual
53-1002696-01
Viewing a policy monitor report
31
Fabric Checks — Fabric checks provide the following information for each selected check:
 Name — Fabric name.
 Status — Result of the check and reason for failure if known. Valid results include
Passed, Partially Failed, Failed, Not Applicable, and Unknown.
Fabric checks include the following options:
 Check zoning is enabled
 Check that all zones belong to at least one zone configuration
 Check the number of initiator ports zoned to each storage port is less than
Configured_Value. This check provides the following additional detail for this check:
- Storage Port — WWN of the storage port.
- Initiator Count — Number of initiator ports zoned to the storage port.
- Initiator Port — WWN of the initiator port.
- Zone — Zone name containing the initiator/storage port zoning pair.
Switch Checks — Switch checks provide the following information for each selected check:
 Name — Product name.
 Status — Result of the check and reason for failure if known. Valid results include
Passed, Partially Failed, Failed, Not Applicable, and Unknown.
Switch Checks include the following options:
 Switch — Check for at least Configured_Minimum_Value connections to neighboring
switches. This check provides the following additional detail for this check:
- Neighboring Switch — Name of the neighboring switch.
- Connection Count — Number of connections to the neighboring switch.
 Switch — Check for HTTPS (secure HTTP) configuration. This check provides the
following additional detail for this check:
- HTTPs Status — Whether HTTPS is enabled or disabled on the product.
- HTTP Status — Whether HTTP is enabled or disabled on the product.
 Switch — Check if the product is configured to send events to this server.
 Switch — Check if the product is configured to send Upload Failure Data Capture to an
FTP server.
 Switch - Check for SSH (secure Telnet) configuration.This check provides the following
additional detail for this check:
- SSH Status — Whether SSH is enabled or disabled on the product.
- Telnet Status — Whether Telnet is enabled or disabled on the product.