Brocade Network Advisor Installation and Migration Guide v12.0.0 (53-1002699-01, April 2013)

8 Network Advisor Installation and Migration Guide
53-1002699-01
System requirements
1
Table 23 summarizes the minimum disk space requirements for running Network Advisor SAN with
SMI Agent on Windows and Linux systems.
Table 24 summarizes the minimum required disk space requirements for running Network Advisor
IP on Windows and Linux systems.
NOTE
It is recommended that you add an additional 100 GB of disk space if you use sFlow.
Table 25 summarizes the minimum disk space requirements for running SMI Agent only on
Windows and Linux systems.
NOTE
If you enable periodic supportSave or configure the Network Advisor server as the Upload Failure
Data Capture location for monitored switches, then additional disk space will be required. Each
switch supportSave file is approximately 5 MB and each Upload Failure Data Capture file is
approximately 500 KB. To determine the disk space requirements, multiply the frequency of
scheduled supportSave files by 5 MB and the expected Upload Failure Data Capture files by 500 KB
before the planned periodic purge activity.
TABLE 23 SAN with SMI Agent disk space requirements
Server/Client Professional Professional
Plus
Enterprise
Small Medium Large
Server plus 1 local client 10 GB 10 GB 20 GB 40 GB 60 GB
Remote client only N/A 1 GB 1 GB 1 GB 1 GB
TABLE 24 IP only disk space requirements
Server/Client Professional Plus Enterprise
Small Medium Large
Server plus 1 local client 10 GB 20 GB 40 GB 60 GB
Remote client only 1 GB 1 GB 1 GB 1 GB
TABLE 25 SMI Agent only disk space requirements
Server/Client Enterprise
Small Medium Large
Server plus 1 local client 20 GB 40 GB 60 GB
Remote client only 1 GB 1 GB 1 GB