HP StorageWorks Application Recovery Manager Installation and Licensing Guide (T4395-96002, February 2008)

Maintaining the Installation
Importing an Installation Server to a Cell
Chapter 3 55
Importing an Installation Server to a Cell
When to Add? An Installation Server must be added to a cell if it is installed on a Cell
Manager, but you also want to use it to perform remote installations in
another cell. It must then be added to the other cell (using the GUI
connected to the Cell Manager of the other cell).
Unlike a client, an Installation Server can be a member of more than one
cell. Therefore it does not have to be deleted (exported) from one cell
before it can be added (imported) to another cell.
How to Add? The process for importing an Installation Server is similar to that for
importing a client. The task is performed using the Application Recovery
Manager GUI (connected to the Cell Manager of the cell to which the
Installation Server is to be added) by performing the following steps:
1. In the Context List, click Clients.
2. In the Scoping Pane, right-click Installation Servers, and then
click Import Installation Server to start the wizard. See Figure
3-1.
3. Enter or select the name of the system that you want to import. Click
Finish to import the Installation Server.