HP StorageWorks Application Recovery Manager Installation and Licensing Guide (T4395-96002, February 2008)

Installing Application Recovery Manager on Your Network
Installing Application Recovery Manager on Microsoft Cluster Server
Chapter 2 45
Otherwise, click Change to open the Change Current Destination
Folder window and enter a new path.
7. In the Component Selection window, select the components you
want to install on all cluster nodes and cluster virtual servers. Click
Next.
The MS Cluster Integration component is selected automatically.
The selected components will be installed on all the cluster nodes.
8. The component selection summary page is displayed. Click Install.
9. The Installation setup page is displayed. Click Next.
Figure 2-20 Installation Status Page
10.To start Application Recovery Manager immediately after install,
select Start the Application Recovery Manager GUI.
On operating systems other than Windows x64, to install or
upgrade the HP OpenView AutoPass utility, select the Start
AutoPass installation or the Upgrade AutoPass installation
option.
It is not recommended to install the HP OpenView AutoPass utility in
Microsoft Cluster, because it will be installed only on the node used
for the installation. If you did install AutoPass, you must uninstall