HP StorageWorks Application Recovery Manager Installation and Licensing Guide (T4395-96002, February 2008)

Installing Application Recovery Manager on Your Network
Installing Application Recovery Manager Clients
Chapter 2 29
Cluster Server The Cluster Server component must
be installed on all Application
Recovery Manager cluster-aware
clients.
Remote Installation of Application Recovery Manager
Clients
This section describes the procedure for distributing the Application
Recovery Manager software to clients using the Installation Server
(remote installation or upgrade).
Prerequisites • See the http://www.hp.com/support/manuals
and refer to the HP
StorageWorks Application Recovery Manager Release Notes for the
information on supported Windows system versions, Application
Recovery Manager components, and for disk space requirements.
• At this point, you should have the Cell Manager and the Installation
Server(s) installed on your network.
NOTE The Installation Server must reside in a shared directory so that it is
visible throughout the network.
Distribute the software to clients using the Application Recovery
Manager user interface.
NOTE You cannot distribute software to clients in another Application Recovery
Manager cell. However, if you have an independent Installation Server,
you can import it into more than one cell. You can then distribute
software within different cells by using the GUI connected to each Cell
Manager in turn.