HP StorageWorks Application Recovery Manager Installation and Licensing Guide (T4395-96002, February 2008)

Installing Application Recovery Manager on Your Network
Installing Application Recovery Manager Clients
Chapter 228
Installation
Procedures
It is recommended that you install clients remotely using the
Installation Server. You can also use the local client installation from the
installation CD-ROMs. For detailed procedures, refer to:
• For remote installation procedure: “Remote Installation of
Application Recovery Manager Clients” on page 29.
• For local installation procedure: “Local Installation of the Application
Recovery Manager Clients” on page 35.
Application Recovery Manager Components
For the latest information on the supported Windows system versions,
visit the HP StorageWorks Application Recovery Manager home page at
http://www.hp.com/support/manuals
.
These are the Application Recovery Manager components you can select
and their descriptions:
User Interface The User Interface includes the
Application Recovery Manager
graphical user interface and the
command-line interface. The software
is needed to access the Application
Recovery Manager Cell Manager and
must be installed at least on the
system that is used for managing the
cell.
MS Volume Shadow Copy Integration The MS Volume Shadow Copy
Integration component must be
installed on the systems where you
want to run backups coordinated by
Volume Shadow Copy Service.
HP StorageWorks EVA SMI-S Agent The HP StorageWorks EVA SMI-S
Agent component must be installed
on the application and the backup
system to integrate HP StorageWorks
Enterprise Virtual Array with
Application Recovery Manager.