HP StorageWorks Application Recovery Manager Installation and Licensing Guide (T4395-96002, February 2008)

Installing Application Recovery Manager on Your Network
Installing Application Recovery Manager Clients
Chapter 226
Installing Application Recovery Manager
Clients
You can install Application Recovery Manager clients remotely, by
distributing them using the Installation Server, or locally, from the
installation CD-ROM.
After you have installed the Application Recovery Manager clients and
eventually imported them into the Application Recovery Manager cell, it
is highly recommended to verify the installation and to protect clients
from unwarranted access. For procedure on verifying the client
installation, refer to “Verifying Application Recovery Manager Client
Installation” on page 107. For more information on security protection,
refer to “Security Considerations” on page 61.
NOTE Note that information regarding the installation and configuration of the
VSS and VDS hardware providers, as well as ZDB disk arrays is found in
the HP StorageWorks Application Recovery Manager Administrator’s
Guide.
Volume Shadow
Copy Service
To be able to coordinate zero downtime backups of online databases and
Windows filesystem using the Microsoft Volume Shadow Copy Service,
install the Application Recovery Manager software component
Microsoft Volume Shadow Copy Integration. See “MS Volume
Shadow Copy Clients” on page 38.
ZDB Integrations Application Recovery Manager ZDB integrations are software
components that allow you to back up data using ZDB disk arrays.
• For installing the integration with HP StorageWorks EVA, see “HP
StorageWorks Enterprise Virtual Array Integration” on page 38.
For details on supported platforms and components for a particular
Windows operating system, see the http://www.hp.com/support/manuals
.