HP StorageWorks Application Recovery Manager Installation and Licensing Guide (T4395-96002, February 2008)

Installing Application Recovery Manager on Your Network
Installing the Application Recovery Manager Cell Manager (CM) and Installation
Server(s) (IS)
Chapter 2 25
As soon as the installation is finished, the software is, by default,
installed in the <AppRM_home>\Depot directory, which is shared so that
it can be accessed from the network.
What’s Next? At this point, you should have Installation Server installed on your
network. Now you should perform the following tasks:
1. If you have set up an independent Installation Server (i.e. not on the
Cell Manager) you must manually add (import) the system to the
Application Recovery Manager cell. Refer to “Importing an
Installation Server to a Cell” on page 55.
2. Distribute the software to clients. Refer to “Installing Application
Recovery Manager Clients” on page 26.