HP StorageWorks Application Recovery Manager Command Line Interface Reference (T4395-96007, December 2007)

omnidbutil (1M)
-67-Hewlett-Packard Company AppRM A.06.00: December 2007
-purge_stop Use this option to stop a running file name purge session. This
command only sends a stop request to the Purge Session Manager.
The response may not be immediate.
-extendfnames Pathname -maxsize Size_MB Creates additional extent
(tablespace). The directory specified by this option must exist and
be capable of holding a tablespace of the size specified by
-maxsize parameter prior to executing this option. The tablespace
cannot be larger than 2047 MB.
-extendtblspace Tablespace Pathname -maxsize Size_MB Creates an
additional extent for the specified tablespace. The specified
directory must exist and be capable of holding an extent of the size
specified by the -maxsize parameter prior to executing this
option. An extent cannot be larger than 2047 MB.
-extendinfo Displays information about existing extents.
-info Displays information about the IDB.
-clear Sets the status of all sessions that are actually not running but are
marked In Progress/Failed, to failed. It requires exclusive
database access to ensure that no session is running.
-change_cell_name [old_host] This option changes the owner of the CDB to
the current Cell Manager. It also changes all references in the
CMMDB from old_host to the current Cell Manager.
If the old_host parameter is not specified, omnidbutil
determines the previous owner of the CDB (old host) from the
database itself.
If you want to associate all media in a CMMDB with the current
Cell Manager, it is necessary to run the command once for each
Cell Manager that has media associated with it, using the
old_host parameter.
The old_host parameter must be specified exactly the same as the
owner of the media. If the system's Fully Qualified Domain Name
(FQDN) is associated with the media, then you must also use the
FQDN with this command. If the old_host parameter is not
specified correctly, the operation will not be performed.
This command is used after moving databases from one Cell
Manager to another or after using -readdb on files that were
created on another Cell Manager.