HP StorageWorks Application Recovery Manager Command Line Interface Reference (T4395-96007, December 2007)

omnidbsmis (1)
-32- Hewlett-Packard CompanyAppRM A.06.00: December 2007
The -ssl option specifies that HP StorageWorks EVA SMI-S
Provider is SSL-enabled. In this case, the SMI-S Agent uses an
SSL-based client connection to communicate with the SMI-S
provider.
The -port port option specifies the port number on which CV
EVA listens to requests. The default port number for CV EVA is
5988 (the -ssl option is not selected) or 5989 (the -ssl option is
selected). If your CV EVA is configured to use a different port
number, set it using this option.
The -namespace namespace parameter is used to specify the
namespace that contains the CIMOM configuration for the EVA.
The default namespace is root/eva.
The -user username option sets the user of CV EVA. The default
user is administrator.
The -passwd password option sets the password that will be used
for logging in to CV EVA. If you omit this parameter, the command
will ask for a password interactively.
If the -check [hostname] option is specified, the SMI-S Agent
tries to connect to the SMI-S CIMOM on the specified host and
displays some information about EVAs that can be accessed
through this CIMOM. Thus, you can check if the configuration of
the CIMOM has been successful. If you omit the hostname
parameter, the connection is performed on the local host.
-ompasswd -remove hostname Removes a system with CV EVA installed
(together with the login and port number information), which has a
name hostname, from the SMISDB.
Used together with the -port port option, the command will only
remove the entries for the specified port. Use this option if you
have more than one port configured on the same system, and you
want to delete only one port from the configuration.
If the -namespace namespace option is specified, the command
will only remove the entries for the specified namespace. Use this
option if you have more than one namespace configured on the
same system, and you want to delete only one namespace from the
configuration.