HP StorageWorks Application Recovery Manager Administrator's Guide (T4395-96004, February 2008)

Configuration
Configuring HP StorageWorks Disk Array XP
Chapter 226
Configuring HP StorageWorks Disk Array XP
This chapter describes configuration of the Application Recovery
Manager HP StorageWorks Disk Array XP (XP) integration.
Prerequisites • XP components and licenses:
— RAID Manager library on the application and backup systems. See
the RAID Manager library documentation for installation
instructions.
RAID Manager Library is firmware-dependant. Consult the HP
sales representative for information on which version of RAID
Manager and RAID Manager Library to use.
— Business Copy (BC) XP microcode and a license for, at least, basic
and business copy operation.
— XP VSS and VDS provider
— Device specific module (MPIO DSM) 2.0
Application Recovery Manager components and licenses:
— An instant recovery license.
— On the Cell Manager, install all the Application Recovery
Manager patches and remotely install the HP StorageWorks XP
Agent.