HP StorageWorks Application Recovery Manager Administrator's Guide (T4395-96004, February 2008)

Configuration
Configuring HP StorageWorks Enterprise Virtual Array
Chapter 2 21
Configuring HP StorageWorks Enterprise
Virtual Array
Overview
This section describes the configuration of the Application Recovery
Manager HP StorageWorks Enterprise Virtual Array (EVA) integration.
It also provides information on the ZDB database.
Prerequisites • HP storage components and licenses:
— HP StorageWorks Virtual Controller Software (VCS or XCS) and
Command View (CV) EVA. See the VCS and CV EVA
documentation for installation instructions. See the support
matrices on the web for information on supported product
versions.
— HP OpenView Storage Operations Manager (HP StorageWorks
SMI-S EVA provider part).
— HP StorageWorks Business Copy (BC) EVA microcode and license.
— If the alternate paths solution is used, install HP MPIO DSM for
EVA.
— An EVA license for, at least, basic and snapshot operation.
Application Recovery Manager components and licenses:
— An instant recovery license.
— HP StorageWorks EVA SMI-S Agent.
For installation and licensing information, see the HP StorageWorks
Application Recovery Manager Installation and Licensing Guide.
• Make sure the same operating system (and its version) is installed on
the application and backup systems.
• Connect EVA to the application and backup systems through the
SAN. Backup system must be connected to the same SAN as the EVA.
See the “Appendix A” on page A-1 for supported backup and connectivity
topologies.