HP Application Recovery Manager software A.06.10 Installation and licensing guide (March 2008)

1. In the Context List, click Clients.
2. In the Scoping Pane, expand MS Clusters, right-click the cluster client that you
want to export, and then click Delete.
3. You are asked if you also want to uninstall the Application Recovery Manager
software. Click No to only export the cluster client.
The cluster client will be removed from the list in the Results Area.
TIP:
To export a specific cluster node or a virtual server, right-click the cluster node or virtual
server in the Scoping Pane and click Delete.
Security considerations
This section describes the security elements of Application Recovery Manager. It
describes the advanced settings that can be used to enhance the security of
Application Recovery Manager with prerequisites and considerations that have to
be taken into account.
Since enhancing security in an entire environment requires additional effort, many
security features cannot be enabled by default.
The considerations described in this chapter apply not only when the security settings
are changed, but must also be followed when configuring new users, adding clients,
or making any other changes these considerations apply to. Any changes in the
security settings can have cell-wide implications and should be carefully planned.
Security layers
Security has to be planned, tested and implemented on different security-critical layers
to ensure the secure operation of Application Recovery Manager. Such layers are
Application Recovery Manager clients, Cell Manager and users. This section explains
how to configure security on each of these layers.
Client security
Application Recovery Manager agents installed on clients in the cell provide numerous
powerful capabilities, like access to all the data on the system. It is important that
Maintaining the installation98