HP Application Recovery Manager software A.06.10 Installation and licensing guide (March 2008)

Installing a cluster-aware client
IMPORTANT:
The Application Recovery Manager cluster-aware clients must be installed on all the
cluster nodes.
The installation procedure is standard procedure for installing Application Recovery
Manager on an UNIX client. Refer to “Installing HP-UX clients” on page 71 for detailed
instructions.
What’s next?
When the installation has been completed, you must import the virtual server (the
hostname specified in the cluster package) to the Application Recovery Manager
cell. See “Importing a cluster-aware client to a cell ” on page 94.
Refer to the online Help index: “configuration” for any additional Application Recovery
Manager configuration tasks.
Installing Application Recovery Manager on Microsoft
Cluster Server
For supported operating systems for Microsoft Cluster Server integration, see the
http://www.hp.com/support/manuals.
If your Cell Manager is to be cluster-aware, note that the virtual server IP address
should be used for licenses.
Installing a cluster-aware Cell Manager
Prerequisites
Before you install the cluster-aware Cell Manager, make sure that you do not have
resources with the following names on the cluster:
OBVS_MCRS, OBVS_VELOCIS, OmniBack_Share
If they exist, delete or rename these resources, because Application Recovery Manager
uses those names for the Application Recovery Manager virtual server.
Installation and licensing guide 81