HP Application Recovery Manager software A.06.10 Installation and licensing guide (March 2008)

automatically imported to the cell with the Cell Manager
computer.company.com:
./omnisetup.sh -server computer.company.com -install
smisa,cc
3. Setup informs you if the installation was completed and if the client was imported
to the Application Recovery Manager cell.
The CORE component is installed the first time any software component is selected
for installation.
The CORE-INTEG component is installed the first time any integration software
component is selected for installation or reinstallation.
Running the installation from the hard disk
To copy the installation CD-ROM to your computer and run the installation of UNIX
clients from the hard disk, copy at least the APPRM_DEPOT directory and the
LOCAL_INSTALL/omnisetup.sh command. For example, if you copy installation
packages to /var/apprm61, APPRM_DEPOT must be a subdirectory of
/var/apprm61:
# pwd
/var/apprm61
# ls
APPRM_DEPOT
omnisetup.sh
After you have copied this to the hard disk, you can run:
omnisetup.sh -source directory [-server name] [-install
component_list]
Note, that the -source option is required. For example:
./omnisetup.sh -source /var/apprm61
What’s next?
If you did not specify the name of the Cell Manager during the installation, the client
will not be imported to the cell. In this case, you should import it using the Application
Recovery Manager graphical user interface. For the procedure, refer to
“Importing clients to a cell ” on page 91. See the online Help for information on
additional configuration tasks.
Installing Application Recovery Manager on your network74