HP Application Recovery Manager software A.06.10 Installation and licensing guide (March 2008)

hostname must be the same. Refer to
“Setting up the TCP/IP protocol on Windows systems” on page 170 for information
on installation and configuration of the TCP/IP protocol.
• Have access to a CD-ROM drive.
• Ensure, that HP OpenView Storage Data Protector is not installed on your system.
If Data Protector is detected during the installation procedure, the installation of
the Application Recovery Manager will be aborted.
• Ensure that network access user rights are set under the Windows local security
policy for the account performing the installation.
Microsoft Terminal Services Client
• If you want to install Application Recovery Manager through Microsoft Terminal
Services Client, ensure that the system you want to install Application Recovery
Manager on has the Terminal Server Mode specified as Remote Administration:
1. In the Windows Control Panel, click Administrative Tools and then Terminal
Services Configuration.
2. In the Terminal Services Configuration dialog box, click Server Settings.
Ensure that the Terminal Services server is running in the Remote
Administration mode.
Cluster-aware Cell Manager
Additional prerequisites and steps are required for installing a cluster-aware Cell
Manager. Refer to “Installing a cluster-aware Cell Manager” on page 81.
HP StorageWorks Fast Recovery Solution
You can install Application Recovery Manager on the same system where you have
the HP StorageWorks Fast Recovery Solution (FRS) installed. These two products can
coexist on the same system as long as they use separate disk array volumes.
During the Application Recovery Manager setup, an existing FRS installation is
detected. Choose one of the three options: Continue with installation, Cancel
installation, or Deinstall FRS. Note that the backups made with FRS cannot be restored
with Application Recovery Manager.
If you install Autopass during the Application Recovery Manager installation and you
later uninstall Application Recovery Manager, the FRS licenses can no longer be
used. If you want to keep the FRS licenses, do not install Autopass during the
Application Recovery Manager installation.
Installing Application Recovery Manager on your network40