HP Application Recovery Manager software A.06.10 Installation and licensing guide (March 2008)

Upgrading clients remotely
For the procedure on how to upgrade the clients using the Installation Server, refer
to “Remote installation of Application Recovery Manager clients” on page 58.
Upgrading clients locally
If you do not have an Installation Server installed on your network, or if for some
reason you cannot distribute the Application Recovery Manager software to a client
system, Application Recovery Manager clients can be upgraded locally.
To upgrade Windows clients locally, refer to “Installing Windows clients” on page 66.
Upgrading the Cell Manager configured on Microsoft
Cluster Server
The upgrade of Application Recovery Manager A.06.00 Cell Manager to Application
Recovery Manager A.06.10 on Microsoft Cluster Server (MSCS) is performed locally,
from the Windows installation CD-ROM.
NOTE:
It is recommended that all cluster nodes have MSI 2.0 installed.
To perform the upgrade, proceed as follows:
1. Insert the Windows installation CD-ROM and run \i386\setup.exe. It is
recommended to start the setup on the currently active virtual server node.
Setup automatically detects the old version of the product and prompts you to
upgrade it to Application Recovery Manager A.06.10.
Click Next to continue.
Installation and licensing guide 129