HP Application Recovery Manager software A.06.10 Installation and licensing guide (March 2008)
Licenses
The existing Application Recovery Manager A.06.00 licenses are fully compatible
and valid for use with Application Recovery Manager A.06.10. For details about
licensing, refer to Chapter 5 on page 133.
Before you begin
Before you begin with the upgrade, refer to “Upgrade overview” on page 121 for
information on limitations and the upgrade sequence.
Upgrading the Windows Cell Manager and Installation Server
When the previous version of Application Recovery Manager is detected, the same
component set as installed is assumed by the operating system (without obsolete
components). The existing package set is removed and the new package set is
installed as for a new (clean) installation.
The Windows Installation Server is upgraded automatically during the upgrade
procedure if it is installed on the same system as the Cell Manager. The old Installation
Server depot is removed and if the Installation Server component is selected
during the installation, the new Installation Server depot is copied to its place.
If the Installation Server is installed together with the Application Recovery Manager
client, and this client is upgraded remotely (using the Application Recovery Manager
GUI), the Installation Server is upgraded as well.
IMPORTANT:
Re-import the upgraded Installation Server after the installation procedure has finished.
For details, refer to “Importing an installation server to a cell ” on page 93.
Microsoft Cluster Server
The upgrade procedure for the Cell Manager, running in the Microsoft Cluster Server
environment, is different from the upgrade procedure for the Cell Manager not
configured for use with Microsoft Cluster Server. The detailed steps you need to follow
are described in
“Upgrading the Cell Manager configured on Microsoft Cluster Server” on page 129.
Installation and licensing guide 123