HP Application Recovery Manager software A.06.10 Administrator's guide (March 2008)

7. Depending on the type of the backup:
• Filesystem backup: Click Next.
• Disk image backup:
a. Click Manual add to add disk image objects.
b. Select Disk image object and click Next.
c. Optionally, enter the description for your object. Click Next.
d. Specify General Object Options. For descriptions of these options, press
F1. Click Next.
e. In the Disk Image Object Options window, specify disk image sections.
HP-UX :
Specify a rawdisk section:
/dev/rdsk/filename, for example: /dev/rdsk/c2t0d0
On HP-UX 11.31, the new naming system can be used:
/dev/rdisk/disk#, for example /dev/rdisk/disk2
Specify a raw logical volume section:
/dev/vgnumber/rlvolnumber, for example: /dev/vg01/rlvol1
IMPORTANT:
If you intend to perform instant recovery on UNIX, select all logical
volumes inside a volume group to be backed up. Otherwise, instant
recovery will not be possible.
Windows:
Use the following format:
\\.\PHYSICALDRIVE#
or
PHYSICALDRIVE#
where # is the current number of the disk to be backed up.
For information on how to find current disk numbers (physical drive
numbers), see the online Help index: “disk image backups”.
f. Click Finish and Next.
8. Save your backup specification. For information on starting and scheduling ZDB
sessions, see Chapter 9 on page 91.
Backup74