HP StorageWorks Application Recovery Manager Installation and Licensing Guide (T4395-96002, February 2008)

Installing Application Recovery Manager on Your Network
Installing Application Recovery Manager on Microsoft Cluster Server
Chapter 2 47
where <host> is the name of the cluster virtual server
(case-sensitive). The output should list the names of the systems
within the cluster and the name of virtual server. If the output
returns 0 “NONE”, Application Recovery Manager is not installed in
the cluster-aware mode.
3. Start the Application Recovery Manager GUI, select the Clients
context, and then click MS Clusters. You should see the newly
installed systems listed in the Results Area.
Installing Cluster-Aware Clients
Prerequisites Before you install a cluster-aware Application Recovery Manager client,
the following prerequisites must be fulfilled:
✓ A cluster must be installed properly with all of its functionality on all
cluster nodes. For example, you must be able to move groups from one
to another node as many times as needed, with no problems with
shared disk(s).
✓ Each system of the cluster should be up and running properly.
Local Installation The Application Recovery Manager cluster-aware clients must be
installed locally, from the CD-ROM, on each cluster node. The cluster
nodes (Application Recovery Manager cluster clients) are imported to the
specified cell during the installation process. You will need then to
import the virtual server name.
The cluster Administrator account is required to perform the
installation. Apart from that, the cluster client setup is the same as for
the Windows client setup. The Cluster Integration component, which is
selected by default during the installation, must be installed in addition
to other Application Recovery Manager client components.
See “For details on supported platforms and components for a particular
Windows operating system, see the
http://www.hp.com/support/manuals.” on page 26 for information on how
to locally install an Application Recovery Manager client system. Note
that during the installation, Application Recovery Manager reports that
a cluster was detected.