HP StorageWorks Application Recovery Manager Installation and Licensing Guide (T4395-96002, February 2008)

Installing Application Recovery Manager on Your Network
Installing Application Recovery Manager on Microsoft Cluster Server
Chapter 242
✓ If a system in the cluster has the Application Recovery Manager
software installed as non-cluster-aware, you need to uninstall it prior
to the setup.
✓ Application Recovery Manager must be installed on the same location
(drive and pathname) on all cluster nodes. Ensure that these
locations are free.
✓ Other Microsoft Installer based installations must not be running on
other cluster nodes.
Local Installation The Application Recovery Manager cluster-aware Cell Manager software
must be installed locally, from the CD-ROM. This can be done as follows:
1. Insert the installation CD-ROM and run:
32-bit OS (on x86 or AMD64/Intel EM64T): \i386\setup.exe
64-bit OS (on AMD64/Intel EM64T): \x8664\setup.exe
The Application Recovery Manager Setup Wizard displays.
2. Follow the Setup Wizard and carefully read the license agreement.
Click Next to continue, if you accept the terms of the agreement.
3. In the Installation Type page, select Cell Manager and then click
Next to install Application Recovery Manager Cell Manager software.