HP StorageWorks Application Recovery Manager Administrator's Guide (T4395-96004, February 2008)

Configuration
Configuring HP StorageWorks Enterprise Virtual Array
Chapter 222
See the “Appendix B” on page B-1 for general Application Recovery
Manager and integration-specific limitations.
ZDB Database - SMISDB
ZDB database for EVA integration is referred to as SMISDB. It keeps
the information about:
• Management systems on which Command View EVA runs configured
in the Application Recovery Manager cell. For each system, the
following is stored:
— Hostname as recognized in the IP network.
— Port number through which SMI-S Agent communicates (default -
5988). If SMI-S provider accepts the SSL-based connection, the
default port number is 5989.
— User name and encoded password for SMI-S EVA provider login.
SMISDB resides on the Cell Manager in:
• <AppRM_home>\db40\smisdb
Configuring the Integration
Before you start configuration, make sure you met the prerequisites
described in “Overview” on page 21. In addition, do the following:
Setting the Login Information to SMI-S CIMOM for Command
View (CV) EVA
Before starting ZDB sessions, provide the login information for CV EVA
running on a management system.
To set, delete, list, or check the login information, use the omnidbsmis
CLI command.
Syntax The following is the syntax of the omnidbsmis commands when used to
set the login information to SMI-S CIMOM for CV EVA as well as when
used to delete, list, and check the login information:
omnidbsmis omnidbsmis -ompasswd {-add <hostname> [-ssl] [-port
<port_number>] [-namespace <namespace>] [-user <username>]
[-passwd <password>] [-check [<hostname>]]| -remove