HP Application Recovery Manager software Integration guide (March 2008)

3. Verify the permissions of the SAP user on application system:
SAP user permissions must be set to enable you to perform an SAP backup or
restore with Application Recovery Manager. See “Configuring users” on page 150.
4. Examine the system errors:
System errors are reported in the following file on the Oracle Server:
/var/opt/omni/log/debug.log
Verifying the backup configuration
Before you begin this section, be sure that you completed all the steps provided in
the sections “Verifying the prerequisites (Oracle side)” on page 185 and
“Verifying the prerequisites (SAP side)” on page 187.
Perform the following verification steps, in numerical order, to verify that Application
Recovery Manager is configured properly:
1. Verify the Application Recovery Manager SAP ZDB configuration on the SAP
R/3 system on which you plan to start the backup:
Execute the following command:
HP-UX :/opt/omni/lbin/util_sap –CHKCONF ORACLE_SID
Windows : AppRM_home\bin\util_sap.exe –CHKCONF ORACLE_SID
If an error occurs, use the following command to obtain an explanation:
Windows: See the file:
AppRM_home\help\enu\Trouble.txt
which is located on the Cell Manager.
HP-UX: Run:
/opt/omni/lbin/omnigetmsg 12 error_number
2. Verify the SAP user.
Check that the respective user group has the See Private Objects user
right selected. Also refer to “Configuring users” on page 150.
Configuration and backup problems
The following list gives a description of problems and actions to be taken to resolve
them:
Integration guide 189