HP Application Recovery Manager software A.06.10 Administrator's guide (March 2008)

Figure 7 Selecting a session
3. In the Scoping Pane, click the backup session you want to restore.
The application system and its mount points/drive letters backed up during the
selected session are displayed.
4. Select the application system and specify the instant recovery options (see
“Instant recovery options” on page 85).
5. Click Restore to start instant recovery, or Preview to preview it (filesystem backup
only).
6. Select Start Restore Session to start instant recovery, or Start Preview Session to
start the preview. Click OK.
Instant recovery using the CLI
1. List all available sessions, identified by the session ID:
omnidbxp -ir -session -list
From the output, select the backup session you want to restore.
2. Execute:
omnir -host application_system_name -session SessionID
[INSTANT RECOVERY OPTIONS]
Where:
application_system_name Application system hostname.
SessionID Backup session ID
(Step 1 on page 84 of this
procedure).
For INSTANT RECOVERY OPTIONS, see Table 15 on page 85.
See the HP Application Recovery Manager software command line interface reference
or the omnidbxp and omnir man pages for details.
Restore84