HP Apollo a6000 Chassis Maintenance and Service Guide

Removal and replacement procedures 33
Power cage
To remove the component:
1. Power down all servers ("Power down the server" on page 21).
2. Remove the management module ("Management module" on page 32).
3. Remove the power cage.
To replace the component, reverse the removal procedure.
Power backplane
To remove the component:
1. Power down all servers ("Power down the server" on page 21).
2. Disconnect all cables from the chassis.
3. Remove all servers ("Remove the server" on page 22).
4. Remove the management module ("Management module" on page 32).
5. Remove both power cages ("Power cage" on page 33).
6. Remove all fan modules ("System fans" on page 30).
7. Remove the chassis from the rack (on page 22).
8. Place the chassis on a flat, sturdy surface to support the chassis.