Installation and Reference Guide (J3210A, J3212A, J3200A, J3202A, J3204A) 1996-08

3-6
Configuring the Switching Hubs in Software
Using the Console
Configuring the Switching
Hubs in Software
Using the Console
The console session starts with a display similar to the following (the actual
version numbers may be different):
After you login, type
MENU and the following menu appears:
The menu system is easy to navigate and use. Each option is described on the
next page.
HP J3210A Switching Hub 10BT Management Module
ROM A.01.00
EEPROM A.01.00
HW A.01.00
Use HP AdvanceStack Assistant commands for
graphical hub configuration.
Type MENU to access the ASCII menu system,
or HE or? for help on console commands.
HP Switching Hub Management Console
___________Main Menu _______
1. Hub Status and Counters...
2. IP/IPX Configuration...
3. Network Connectivity Tests...
4. Port/Segment Configuration...
5. Managers/Password Change...
6. Security Configuration/Information...
7. Connection Configuration...
8. Configuration/Reset Controls...
9. Switch Controls...
0. Lookout
Enter Selection =>