Ethernet SNMP Module Installation and Reference Guide ( J2603B) 1995-10

Installing the Module

The HP Ethernet SNMP Module is installed in the Expansion Slot on the

back of the HP AdvanceStack 10Base-T Hub.

Warning Before installing the HP Ethernet SNMP Module, unplug the

HP AdvanceStack Hub from the power source. Electrical shock

could result if you attempt to install the module without

unplugging the hub.

Caution Static electricity can severely damage the sensitive electronic

components on the HP Ethernet SNMP Module. When installing the

module in your hub, follow these procedures to avoid damage from

static electricity:

Handle the module by its edges and avoid touching the components

and the circuitry on the board.

Equalize any static charge difference between your body and the hub

by wearing a wrist strap and attaching it to the hub’s metal body, or

by frequently touching the hub’s metal body while you are installing

the module.

Installation

1-2