HP V142 Rack Options Installation Guide

Baying kit 7
Baying kit
About this device
The HP V142 Rack Baying kit enables you to connect multiple racks of the same series, height, and depth.
Kit contents
Item Quantity
24-inch baying brackets 4
600-mm baying brackets 4
M5 self tapping screws 10
Extra hardware might be included for your convenience.
Required tools
• T-25 Torx driver
Installing the baying kit
WARNING: To reduce the risk of personal injury or damage to the rack and equipment, the
racks must be positioned and secured together according to these instructions. Failure to do
so could result in an unstable installation.
NOTE: The appearance of the rack might vary depending on the model of the rack
purchased.
1. Remove the side panels (if present between the racks).
2. Position the racks side by side, ensuring that the feet of the racks are on solid flooring (no cracks or
openings).