HP V142 Rack Options Installation Guide

Ground Bonding kit 11

Place one end of the grounding strap over the grounding lug on the rear rack frame.

2. Place an M6 ground washer and an M6 ground nut over the grounding lug on the rack frame, and

then tighten the ground nut.

3. Place the other end of the same grounding strap over the grounding lug on the top of the rack.

4. Place an M6 ground washer and an M6 ground nut over the grounding lug on the top of the rack,

and then tighten the ground nut.

5. Repeat steps 1 through 4 to attach a grounding strap from the front rack frame to the rack top.

From the rack to a building facility

For assistance, contact your building supervisor.

Reference Item

48.26-cm (19-in) mounting rail (the mounting hole is

located at the top or bottom of the rail)

2 M6 ground nut